Brother MFC-465CN - Manual (Page 105)

PhotoCapture Center
®
: Printing photos from a memory card or USB Flash memory drive
89
13
d
Press a or b to choose
Remove Red-Eye
.
Press OK.
„ When Remove Red-Eye is
successful, the photo after effect is
shown. The adjusted part is shown in
a red frame.
„ When Remove Red-Eye is
unsuccessful,
Unable to Detect.
is shown.
Press OK to go back to the previous
level.
Note
Press # to try Remove Red-Eye once
again.
e
Press a or b to increase or decrease the
number of copies.
f
Do one of the following.
„ Press OK and change the print
settings. (See page 92.)
„ If you do not want to change any
settings, press Color Start to print.
Monochrome
13
You can convert your photo to black & white.
a
Make sure you have put a memory card
or USB Flash memory drive in the
proper slot.
Press (PhotoCapture).
b
Press a or b to choose
Photo Effects
.
Press OK.
c
Press d or c to choose your photo.
Press OK.
d
Press a or b to choose Monochrome.
Press OK.
e
Press a or b to increase or decrease the
number of copies.
f
Do one of the following.
„ Press OK and change the print
settings. (See page 92.)
„ If you do not want to change any
settings, press Color Start to print.
Sepia
13
You can convert the color of your photo to
sepia.
a
Make sure you have put a memory card
or USB Flash memory drive in the
proper slot.
Press (PhotoCapture).
b
Press a or b to choose
Photo Effects
.
Press OK.
c
Press d or c to choose your photo.
Press OK.
d
Press a or b to choose Sepia.
Press OK.
e
Press a or b to increase or decrease the
number of copies.
f
Do one of the following.
„ Press OK and change the print
settings. (See page 92.)
„ If you do not want to change any
settings, press Color Start to print.