Brother MFC-465CN - Manual (Page 46)

30
5
Entering Fax mode
5
When the machine is idle, the time appears
on the LCD. When you want to send a fax, or
change fax send or receive settings, press
the (Fax) key to illuminate it in green.
The LCD shows:
Press a or b to scroll through the Fax key
options. Some functions are only available
when sending black & white faxes.
„
Fax Resolution
(See page 33.)
„
Contrast
(See page 33.)
„
Speed Dial
(See page 54.)
„
Outgoing Call
(See page 55.)
„
Caller ID hist.
(See page 55.)
„
Broadcasting
(See page 32.)
„
Delayed Fax
(See page 35.)
„
Batch TX
(See page 35.)
„
Real Time TX
(See page 34.)
„
Polled TX
(See page 72.)
„
Polling RX
(See page 71.)
„
Overseas Mode
(See page 35.)
„
Scan Size
(See page 31.)
„
Set New Default
(See page 36.)
„
Factory Reset
(See page 36.)
When the option you want is highlighted,
press OK.
Faxing from the ADF
5
a
Press (Fax).
b
Put the document face down in the ADF.
(See Using the ADF on page 9.)
c
Enter the fax number using the dial pad,
Speed Dial or Search.
d
Press Black Start or Color Start.
The machine starts scanning the
document.
Note
• To cancel, press Stop/Exit.
• If you send a black & white fax when the
memory is full it will be sent in real time.
Faxing from the scanner
glass
5
You can use the scanner glass to fax pages
of a book one at a time. The documents can
be up to letter or A4 size.
You cannot send multiple pages for color
faxes.
Note
Since you can only scan one page at a
time, it is easier to use the ADF if you are
sending a multiple page document.
Sending a fax
5
09012345689
FAX
Fax Start Press
Fax Resolution Standard
Contrast Auto
Speed Dial
Outgoing Call