Brother MFC-465CN - Manual (Page 113)

PhotoCapture Center
®
: Printing photos from a memory card or USB Flash memory drive
97
13
e
Do one of the following.
„ To change the quality, go to step f.
„ Press Black Start or Color Start to
start scanning without changing
additional settings.
f
Press a or b to choose 150dpi Color,
300dpi Color
, 600dpi Color,
200x100dpi B/W
or 200dpi B/W.
Press OK.
g
Do one of the following.
„ To change the file type, go to step h.
„ Press Black Start or Color Start to
start scanning without changing
additional settings.
h
Press a or b to choose JPEG, PDF or
TIFF
.
Press OK.
Note
• If you chose color in the resolution setting,
you cannot choose TIFF.
• If you chose black & white in the resolution
setting, you cannot choose JPEG.
i
Do one of the following.
„ To change the file name, go to
step j.
„ Press Black Start or Color Start to
start scanning without changing
additional settings.
j
The file name is set automatically
however, you can set a name of your
choice using the dial pad. You can only
change the first 6 digits.
Press OK.
Note
Press Clear/Back to delete the current
name.
k
Press Black Start or Color Start.
Understanding the
Error Messages
13
Once you are familiar with the types of errors
that can occur while you are using
PhotoCapture Center
®
, you can easily
identify and troubleshoot any problems.
„
Hub is Unusable.
This message will appear if a Hub or USB
Flash memory drive with a Hub has been
put into the USB direct interface.
„
Media Error
This message will appear if you put in a
memory card that is either bad or not
formatted, or when there is a problem with
the media drive. To clear this error, take
out the memory card.
„
No File
This message will appear if you try to
access a memory card or USB Flash
memory drive in the drive (slot) that does
not contain a .JPG file.
„
Out of Memory
This message will appear if you are
working with images that are too large for
the machine's memory. This message will
also appear when a memory card or USB
Flash memory drive you are using does
not have enough space available for the
scanned document.
„
Media is Full.
This message will appear if you are trying
to save more than 999 files in a memory
card or USB Flash memory drive.
„
Unusable Device
This message will appear if a USB device
or USB Flash memory drive that is not
supported has been connected to the USB
direct interface. For more information, visit
us at http://solutions.brother.com. This
message can also appear if you connect a
broken device to the USB direct interface.