Brother MFC-465CN - Manual (Page 110)

Chapter 13
94
Adjusting Brightness,
Contrast and Color
13
Brightness
13
a
Press a or b to choose Brightness.
Press OK.
b
Press d or c to make the copy lighter or
darker.
Press OK.
c
If you do not want to change additional
settings, press Color Start to print.
Contrast
13
You can choose the contrast setting. More
contrast will make an image look sharper and
more vivid.
a
Press a or b to choose Contrast.
Press OK.
b
Press d or c to increase or decrease the
contrast.
Press OK.
c
If you do not want to change additional
settings, press Color Start to print.
Color Enhancement (True2Life
®
)
13
You can turn on the color enhancement
(True2Life
®
) feature to print more vivid
images. Printing time will be slower.
a
Press a or b to choose True2Life.
Press OK.
b
Do one of the following:
„ If you want to customize the White
Balance, Sharpness or Color
Density, press d or c to choose On,
and then go to step c.
„ If you do not want to customize,
press d or c to choose Off.
Press OK and then go to step f.
c
Press a or b to choose
White Balance
, Sharpness or
Color Density
.
Press OK.
d
Press d or c to adjust the degree of the
setting.
Press OK.
e
Do one of the following:
„ If you want to customize another
color enhancement, press a or b to
choose another option.
„ If you want to change other settings,
press a or b to choose Exit, and
then press OK.
f
If you do not want to change additional
settings, press Color Start to print.
Note
• White Balance
This setting adjusts the hue of the white
areas of an image. Lighting, camera
settings and other influences will effect the
appearance of white. The white areas of a
picture may be slightly pink, yellow or
some other color. By using this setting,
you can correct that effect and bring the
white areas back to pure white.
• Sharpness
This setting enhances the detail of an
image, similar to adjusting the fine focus
on a camera. If the image is not in true
focus and you cannot see the fine details
of the picture, then adjust the sharpness.
• Color Density
This setting adjusts the total amount of
color in the image. You can increase or
decrease the amount of color in an image
to improve a washed out or weak picture.