Brother MFC-9130CW - Manual (Page 137)

Additional network settings from Windows ®
131
12
Network printing and scanning installation for Infrastructure
mode when using Vertical Pairing (Windows
®
7 and
Windows
®
8)
12
Windows
®
Vertical Pairing is a technology that allows your Vertical Pairing supported wireless machine to
connect to your Infrastructure network using the PIN Method of WPS and the Web Services feature. This also
enables the printer driver and scanner driver installation, from the multi-function printer icon that is in the Add
a device screen.
If you are in Infrastructure mode, you can connect your machine to the wireless network and then install the
printer driver using this feature. Follow the steps below:
NOTE
• If you have set your machine’s Web Services feature to Off, you must set it back to On. The default setting
of the Web Services for the Brother machine is On. You can change the Web Services setting by using
Web Based Management (web browser) or BRAdmin Professional 3.
• Make sure your WLAN access point/router includes the Windows
®
7 or Windows
®
8 compatibility logo. If
you are not sure about the compatibility logo, contact your access point/router manufacturer.
• Make sure your computer includes the Windows
®
7 or Windows
®
8 compatibility logo. If you are not sure
about the compatibility logo, contact your computer manufacturer.
• If you are configuring your wireless network using an external wireless NIC (Network Interface Card),
make sure the wireless NIC includes the Windows
®
7 or Windows
®
8 compatibility logo. For more
information, contact your wireless NIC manufacturer.
• To use a Windows
®
7 or Windows
®
8 computer as a Registrar, you need to register it to your network in
advance. See the instruction, supplied with your WLAN access point/router.