Brother MFC-9130CW - Manual (Page 47)

Control panel setup
41
4
Mail Address
4
You can set your machine’s E-mail address.
Setup Server
4
SMTP
 SMTP Server
This field displays the node name or IP address of an SMTP mail server (outgoing E-mail server) on your
network.
(e.g. “mailhost.brothermail.net” or “192.000.000.001”)
 SMTP Port
This field displays the SMTP port number (for outgoing E-mails) on your network.
 Auth. for SMTP
You can specify the security method for E-mail notification. (For details on the security methods for E-mail
notification, see Sending or Receiving an E-mail securely on page 99.)
 SMTP SSL/TLS
You can choose the encryption method between the machine and the SMTP server.
 Verify Cert.
You can enable or disable the use of the security certificate between the machine and the SMTP server.
4
POP3
 POP3 Server
This field displays the node name or IP address of the POP3 server (incoming E-mail server) used by the
Brother machine. This address is necessary for the Internet fax features to function correctly.
(e.g. “mailhost.brothermail.net” or “192.000.000.001”)
 POP3 Port
This field displays the POP3 port number (for incoming E-mails) used by the Brother machine.
 Mailbox Name
You can specify a mailbox name on the POP3 server where the Internet print jobs are to be retrieved.
 Mailbox Pwd
You can specify the password for the POP3 server account where the Internet print jobs are to be
retrieved.
NOTE
To set for no password, enter a single space.
 POP3 SSL/TLS
You can choose the encryption method between the machine and the POP3 server.