Brother MFC-9130CW - Manual (Page 54)

Control panel setup
48
4
Printing the Network Configuration Report
4
NOTE
Node name: The Node name appears on the Network Configuration Report. The default node name is
“BRNxxxxxxxxxxxx” for a wired network or “BRWxxxxxxxxxxxx” for a wireless network. (“xxxxxxxxxxxx” is
your machine’s MAC Address / Ethernet Address.)
The Network Configuration Report prints a report listing all the current network configuration including the
network print server settings.
a
Press .
b
Press All Settings .
c
Swipe up or down, or press a or b to display Print Reports .
Press Print Reports .
d
Press Network Configuration .
e
Press OK .
NOTE
If the IP Address on the Network Configuration Report shows 0.0.0.0, wait for one minute and try again.
Printing the WLAN report
(For DCP-9020CDW, MFC-9130CW, MFC-9330CDW and
MFC-9340CDW)
4
The WLAN Report prints your machine’s wireless status report. If the wireless connection failed, check the
error code on the printed report. See Quick Setup Guide: Troubleshooting.
a
Press .
b
Press All Settings .
c
Swipe up or down, or press a or b to display Print Reports .
Press Print Reports .
d
Swipe up or down, or press a or b to display WLAN Report .
Press WLAN Report .
e
Press OK .