Brother MFC 9560CDW - Manual (Page 16)

Chapter 2
10
i
Press Stop/Exit.
Note
You cannot use the same name as
another user’s name.
Turning Secure Function
Lock on/off
2
If you enter the wrong password, the LCD will
show Wrong Password. Re-enter the
correct password.
Turning Secure Function Lock on
a
Press Menu, 1, 7, 1.
17.Security
1.Function Lock
a Lock OffiOn
b Set Password
Select ab or OK
b
Press a or b to choose Lock OffiOn.
Press OK.
c
Enter your four-digit administrator
password.
Press OK.
Turning Secure Function Lock off
a
Press Menu, 1, 7, 1.
17.Security
1.Function Lock
a Lock OniOff
b Change ID
Select ab or OK
b
Press a or b to choose Lock OniOff.
Press OK.
c
Enter your four-digit administrator
password.
Press OK.
Switching Users
2
This setting allows you to switch between
registered restricted users or Public mode
when Secure Function Lock is turned on.
Changing to the restricted user Mode
a
Hold down Shift as you press Secure.
Function Lock
Change ID
a BROTHER
b ABC
Select ab or OK
b
Press a or b to choose ID.
Press OK.
c
Enter your four-digit password.
Press OK.
Changing to the Public Mode
After a restricted user has finished using the
machine, it will return to the Public setting
within the same time as the Mode Timer
setting (Menu, 1, 1). (See Mode Timer
on page 6.) You can also exit from the
restricted user mode by pressing the current
Mode key you are in. Then LCD will ask you
Go to Public?
.
Press 1 to choose 1.Yes.