Brother MFC 9560CDW - Manual (Page 89)

Routine maintenance
83
A
r
Put the two styrofoam pieces (1) into the
carton matching the right of the machine
to the "RIGHT" mark on one of the
styrofoam pieces, and the left of the
machine to the "LEFT" mark on the
other styrofoam piece. Put the AC
power cord and printed materials in the
original carton as shown in the
illustration.
Note
If you are returning your machine to
Brother as part of the Exchange Service,
pack only the machine. Keep all separate
parts, including the drum unit, toner
cartridges, and printed materials to use
with your ‘Exchange’ machine.
s
Close the carton and tape it shut.
RIGHT
LEFT
1
1