Brother MFC 9560CDW - Manual (Page 26)

Chapter 3
20
Canceling a Broadcast in progress
3
While broadcasting you can cancel the fax
currently being sent or the whole broadcast
job.
a
Press Menu, 2, 7.
The LCD will display the Broadcast job
number followed by the fax number or
name being dialed (for example,
#001 123456789
) and the broadcast
job number (for example,
Broadcast#001
).
27.Remaining Jobs
a
#001 0123456789
b Broadcast#001
Select ab or OK
b
Press a or b to choose one of the
following:
 Choose the fax number being dialed,
and press OK.
 Choose the broadcast job number,
and press OK.
c
Press 1 to cancel the fax number or
Broadcast job number you chose in step
b
, or press 2 to exit without canceling.
If you chose to only cancel the fax
currently being sent in step b, the LCD
will ask you if you want to cancel the
broadcast job. Press 1 to clear the whole
broadcast job or 2 to exit.
d
Press Stop/Exit.
Real Time Transmission
3
When you are sending a fax, the machine will
scan the documents into the memory before
sending it. Then, as soon as the telephone
line is free, the machine will start dialing and
sending.
Sometimes, you may want to send an
important document immediately, without
waiting for memory transmission. You can set
Real Time TX
to On for all documents or
Next Fax:On
for the next fax only.
Note
• If the memory is full and you are sending a
black and white fax from the ADF, the
machine will send the document in real
time (even if Real Time TX is set to Off). If
the memory is full, faxes from the scanner
glass cannot be sent until you clear some
of the memory.
• In Real Time Transmission, the automatic
redial feature does not work when using
the scanner glass.
Sending in real time for all faxes
3
a
Make sure you are in Fax mode .
b
Press Menu, 2, 2, 5.
22.Setup Send
5.Real Time TX
a On
b Off
Select ab or OK
c
Press a or b to choose On.
Press OK.