Brother MFC 9560CDW - Manual (Page 80)

74
Frequency (Color Correction)
A
You can set how often the color correction
(Color Calibration and Auto Registration)
occurs. The default setting is Normal. The
color correction process consumes some
amount of the toner.
a
Press Menu, 4, 9.
b
Press a or b to choose Normal, Low or
Off.
Press OK.
c
Press Stop/Exit.
Checking the Page Counters
A
You can see the machine’s Page Counters
for copies, printed pages, reports and lists,
faxes or a summary total.
a
Press Menu, 8, 2.
82.Page Counter
a
Total :XXXXXX
Fax/List :XXXXXX
b Copy :XXXXXX
Select ab or OK
b
Press a or b to see Total, Fax/List,
Copy or Print.
c
Press Stop/Exit.
Checking the remaining life of
parts
A
You can see the machine’s parts life on the
LCD.
a
Press Menu, 8, 3.
83.Parts Life
1.Drum
2.Belt Unit
3.Fuser
Select ab or OK
b
Press a or b to choose 1.Drum,
2.Belt Unit, 3.Fuser, 4.Laser,
5.PF Kit MP, 6.PF Kit 1 or
7.PF Kit 2.
Press OK.
c
Press Stop/Exit.
Note
The life check will be accurate only if you
have reset the part counter when you
installed a new part. It will not be accurate
if that part’s life counter was reset during
the life of the used part.