Brother MFC 9560CDW - Manual (Page 91)

Options
85
B
Optional paper tray
(LT-300CL)
B
An optional lower tray can be installed, and it
can hold up to 500 sheets of 20 lb (80 g/m
2
)
paper.
When an optional tray is installed, the
machine can hold up to 800 sheets of plain
paper.
For setup, see the Instructions that we have
supplied with the lower tray unit.
Memory board
B
MFC-9560CDW has 256 MB of standard
memory and MFC-9460CDN has 128 MB.
Both models have one slot for optional
memory expansion. You can increase the
memory up to maximum of 512 MB for
MFC-9560CDW and 384 MB for
MFC-9460CDN by installing one SO-DIMM
(Small Outline Dual In-line Memory Module).
SO-DIMM Types
B
You can install the following SO-DIMMs:
 128 MB Kingston KTH-LJ2015/128
 256 MB Kingston KTH-LJ2015/256
 128 MB Transcend TS128MHP422A
 256 MB Transcend TS256MHP423A
Note
• For more information, visit the Kingston
Technology Web site at
http://www.kingston.com/.
• For more information, visit the Transcend
Web site at http://www.transcend.com.tw/.
In general, the SO-DIMM must have the
following specifications:
Type: 144-pin and 16-bit output
CAS latency: 4
Clock frequency: 267 MHz (533 Mb/S/Pin) or
more
Capacity: 64, 128 or 256 MB
Height: 30.0 mm (1.18 in.)
DRAM type: DDR2 SDRAM
Note
• There might be some SO-DIMMs that will
not work with the machine.
• For more information, call the dealer you
bought the machine from or Brother
Customer Service.