Brother FAX-2440C - Manual (Page 73)

4 - 5 SETUP RECEIVE
Setting the F/T Ring Time (Fax/Tel mode only)
If you set the Receive Mode to Fax/Tel, you’ll need to decide how long
the machine will signal you with its special pseudo/double-ring when
you have a voice call. (If it’s a fax call, the machine prints the fax.)
This pseudo/double-ring happens after the initial ringing from the
phone company. Only the machine rings and no other phones on the
same line will ring with the special pseudo/double-ring. However, you
can still answer the call on any telephone. (See For Fax/Tel mode
when power key is On on page A-8.)
1
If it is not illuminated in green, press ( Fax ).
2
Press Menu/Set , 2 , 1 , 2 .
3
Press ▲ or ▼ to select how long the
machine will ring to alert you that you
have a voice call (20, 30, 40 or 70 seconds).
Press Menu/Set .
4
Press Stop/Exit .
Setting the Fax/Tel Announcement
For the Fax/Tel receive mode, you can set up the machine to play an
outgoing announcement for callers when no one is there to answer
calls. (See Record Fax/Tel Outgoing Announcement (F/T OGM) on
page 7-8.)
Even if the caller hangs up during the pseudo/double-ringing,
the machine will continue to ring for the set time.
Setup Receive
2.F/T Ring Time