Brother FAX-2440C - Manual (Page 47)

2 - 5 GETTING STARTED
Setting the Ring Volume
You can turn the ring Off or you can select the ring volume level.
1
Press Menu/Set , 1 , 4 , 1 .
2
Press ▲ or ▼ to select
Low , Med , High or Off .
Press Menu/Set .
3
Press Stop/Exit .
—OR—
You can adjust the ring volume when your machine is idle (not being
used). In Fax mode
, press or to adjust the volume
level. Every time you press these keys, the machine will ring so you
can hear the active setting as the LCD shows it. The volume changes
with each key press. The new setting will stay until you change it
again.
Setting the Beeper Volume
You can change the beeper volume. The default (factory) setting is
Low . When the beeper is on, the machine will beep when you press
a key, make a mistake or after you send or receive a fax.
1
Press Menu/Set , 1 , 4 , 2 .
2
Press ▲ or ▼ to select your option.
( Low , Med , High or Off )
Press Menu/Set .
3
Press Stop/Exit .
Volume
1.Ring
Volume
2.Beeper