ADS Technologies INSTANT DVD 2 - Manual (Page 33)

INSTANT DVD 2.0 Page 32
ENGLISH
INSTANT DVD 2.0 Page 33
ENGLISH
Video Capture Property Settings dialog box
To change video capture properties, click on the Options button.
1.) Select the audio frequency (44.1 kHz or 48 kHz) for your capture
Note: Generally 44.1 kHz is used for VCD and SVCD and 48 kHz is used for DVD.
2.) Select the MPEG Video format you want to capture in; VCD, SVCD or DVD
3.) Select your Video Source; S-Video, Composite or DV
Note: DV is supported in Instant DVD + DV only. A TV tuner is not included on your Instant DVD unit.
You can capture TV signals from a Satellite receiver or VCR via your Composite (RCA) input.
4.) Select the video capture bit rate you desire.
5.) Select the capture resolution.
6.) Select the Video output if you wish to preview video on a TV or output to a VCR.
7.) Format: Select NTSC or PAL video standard.
8.) Click OK and you are ready to capture video in Video Studio.
Begin Video Capture:
1.) Click the Capture Video icon to begin recording.
2.) Click it once again or click the “esc” key on your keyboard to stop video capture.