Scanning a document using the ica driver, Mac os x 10.6.x - 10.7.x) – Brother MFC-7240 User Manual
Page 125
Scanning
118
8
Scanning a document using the ICA driver
(Mac OS X 10.6.x - 10.7.x)
8
You can scan a document using the ICA driver. If you installed MFL-Pro Suite from the installer CD-ROM, the
ICA driver has been already installed to your Macintosh. If you don’t see your machine in the Print & Fax or
Print & Scan list, you can add your machine by clicking the + button. You can also scan directly using the
Image Capture application (See Choosing your machine from Print & Fax or Print & Scan uu page 120).
Note
The screens in this section are from Mac OS X 10.6.x. The screens on your Macintosh will vary depending
on your operating system version.
a
Connect your Brother machine to the Macintosh using a USB cable.
b
Launch Image Capture.
c
Select the machine from the DEVICES area on the left side of the screen.
Note
(For Mac OS X 10.7.x)
If you cannot see the machine in the DEVICES area, point the mouse pointer over the area, and then click
Show.