Brother MFC-7240 - Manual (Page 27)

Printing
20
2
 Watermark Lock
Lock the current settings of the Watermark option to prevent changes being made.
 Header-Footer Print Lock
Lock the current settings of the Header-Footer Print option to prevent changes being made.
Other Print Options
2
You can set the following in Printer Function:
 Density Adjustment
 Improve Print Output
 Skip Blank Page
Density Adjustment
2
Increase or decrease the print density.
Improve Print Output
2
This feature allows you to improve a print quality problem.
 Reduce Paper Curl
If you choose this setting, the paper curl may be reduced.
If you are printing only a few pages, you do not need to choose this setting. We recommend that you
change the printer driver setting in Media Type to the thin setting.
Note
This operation will decrease the temperature of the machine’s fusing process.
 Improve Toner Fixing
If you choose this setting, the toner fixing on paper may be improved. If this selection does not provide
enough improvement, change the printer driver setting in Media Type to a thick setting.
Note
This operation will increase the temperature of the machine’s fusing process.
 Reduce Ghosting
If you are using the machine in a high humidity environment this setting may reduce ghosting on the paper.
Do not use this setting if the ambient humidity is below 30% or ghosting may increase.
Note
This feature may not reduce ghosting for all types of paper. Before you buy a lot of paper, test a small
quantity to make sure that the paper is suitable.