Brother MFC-5490CN - Manual (Page 155)

Menu and Features
141
C
5.Network
(Continued)
1.Setup TCP/IP
(Continued)
0.IPv6 On
Off*
Enable or disable the IPv6
protocol. If you want to
use the IPv6 protocol, visit
http://solutions.brother.
com for more information. See
Network
User’s
Guide
2.Setup Misc. 1.Ethernet Auto*
100B-FD
100B-HD
10B-FD
10B-HD
Chooses Ethernet link
mode.
0.Factory Reset 1.Reset
2.Exit
— Restore all network
settings to factory default.
6.Print Reports 1.Transmission — — Prints a Transmission
Verification Report for
your last transmission. 63
2.Help List — — Prints the Help List so you
can see at-a-glance how
to quickly program your
machine.
3.Quick Dial — — Lists name and numbers
stored in the One Touch
and Speed Dial memory,
in numerical order.
4.Fax Journal — — Lists information about the
last incoming and
outgoing faxes. (TX
means Transmit.) (RX
means Receive.)
5.User Settings — — Lists your settings.
6.Network Config — — Lists your network
settings.
7.Machine Info. 1.Serial No. — — Lets you check the serial
number of your machine. 128
0.Initial Setup 1.Receive Mode — Fax Only*
Fax/Tel
External TAD
Manual
Choose the receive mode
that best suits your needs. 35
2.Date&Time — — Puts the date and time on
the LCD and in headings
of faxes you send. See
Quick
Setup
Guide
3.Station ID — Fax:
Name:
Set your name and fax
number to appear on each
page you fax.
Main Menu Submenu Menu Selections Options Descriptions Page
The factory settings are shown in Bold with an asterisk.