Brother MFC-5490CN - Manual (Page 98)

Chapter 13
84
Borderless printing
13
This feature expands the printable area to the
edges of the paper. Printing time will be
slightly slower.
a
Press Menu, 4, 6.
b
Press a or b to choose Off (or On).
Press OK.
c
Press Stop/Exit.
Print Date
13
You can print the date if it is already in the
data on your photo. The date will be printed
on the lower right corner. If the data doesn’t
have the date information, you cannot use
this function.
a
Press Menu, 4, 7.
b
Press a or b to choose On (or Off).
Press OK.
c
Press Stop/Exit.
Note
The DPOF setting on your camera must
be turned off to use the Print Date
feature.
Scan to a memory card
or USB Flash memory
drive
13
You can scan black & white and color
documents into a memory card or USB Flash
memory drive. Black and white documents
will be stored in PDF (*.PDF) or TIFF (*.TIF)
file formats. Color documents may be stored
in PDF (*.PDF) or JPEG (*.JPG) file formats.
The default setting is Color 150 dpi and
the default file format is PDF. File names
default to the current date that you set using
the control panel keys. (For details, see the
Quick Setup Guide.) For example, the fifth
image scanned on July 1, 2009 would be
named 07010905.PDF. You can change the
color and quality.
a
Insert a CompactFlash
®
, Memory
Stick
®
, Memory Stick Pro™, SD, SDHC,
xD-Picture Card™ or USB Flash
memory drive into your machine.
CAUTION
DO NOT take out the memory card or USB
Flash memory drive while Photo Capture
is blinking to avoid damaging the card, USB
Flash memory drive or data stored on the
card.
b
Load your document.
c
Press (Scan).
Quality Selectable File
Format
Color 150 dpi JPEG / PDF
Color 300 dpi JPEG / PDF
Color 600 dpi JPEG / PDF
B/W 200x100 dpi TIFF / PDF
B/W 200 dpi TIFF / PDF