ACR Electronics Nauticast Y1-03-0203 User Manual
Page 26
User Manual
26
Y1-03-0203 Rev.L
Dynamic Keys: Messages
[M5]
[Select]
Write Message to
Selected Vessel
[Enter]
Write Message to
Selected Vessel
[M8]
[Back]
Return to Messages
Menu
b) Using the NAUTICAST Message Editor
After selecting a vessel, the Message Editor is automatically displayed.
Messages containing a maximum of 156 characters are allowed. Longer texts require a second
message. After text input completion, transmission to the selected addressee is facilitated by
pressing the [Send] button. The [<Back] button leads to the Message Editor for writing a second
message to the same addressee. A second activation of the [<Back] button leads to the Vessel
Listing and allows selection of another addressee.
It is possible to select the desired channel by pressing the [<Channel>] buttons.
The default setting for Addressed Messages is (auto) in contrast to Broadcasted Messages, where
the default setting is set at Channels A+B (AIS1 + AIS2).
Dynamic Keys: Addressed Message Editor
[M5]
[Send]
Send Message
[Enter]
Send Message
[M6]
[Channel]
Select Transmission
Channel
[M7]
[Channel]
Select Transmission
Channel
[M8]
[Back]
Return to Vessel
Listing
N 1
o
20' E 0
o
13' |1>0.10|2>1.30|3>1.80nm
************ Write Message *************
Addressed SRM 129
SendTo:5004 (DOREEN)
Text:TEXT INPUT IS POSSIBLE HERE
----------------------------------------
auto/ A / B /A+B
Channel: [*]/[ ]/[ ]/[ ]
----------------------------------------
| Send |<Channel |Channel> | Back