ACR Electronics Nauticast Y1-03-0203 - Manual (Page 61)

User Manual 61 Y1-03-0203 Rev.L
After pressing [OK], the Data Saved Screen confirms the Restore Factory Settings command.
Note: The NAUTICAST has been restored to the Factory Settings!
Now please configure your:
- Ship Settings
- Voyage Settings
- User Password
-
Service Password
3.5.7 Display Settings
It is possible to choose from Daylight and Nightlight Display Settings; it is further possible to adjust
the Brightness and Contrast Settings for both Display Settings.
The maximum setting for Brightness and Contrast is <9>, the minimum setting is <0>.
It is possible to automatically switch the Display Settings on the NAUTICAST to Day or Night
Settings from any Menu Screen by pressing the [M4]
[Displ] button.
N 1 o 20' E 0 o 13' |1>0.10|2>1.30|3>1.80nm
----------------------------------------
++++++++++++++++++++++++++++++++++++++++
Data saved.
++++++++++++++++++++++++++++++++++++++++
----------------------------------------
| | | |<- Exit
N 1 o 20' E 0 o 14' |1>0.10|2>1.30|3>1.80nm
*********** Display Settings ***********
Mode
|
+-[*] Day Min Max
| +---- Brightness:<9> [*********]
| +---- Contrast : 6 [****** ]
|
|
+-[ ] Night Min Max
+---- Brightness: 3 [*** ]
+---- Contrast : 2 [** ]
----------------------------------------
NUM| DayNight| | | Back