ACR Electronics Nauticast Y1-03-0203 User Manual
Page 57
User Manual
57
Y1-03-0203 Rev.L
3.5.6 Service Configuration (Service Password Protected)
The Service Configuration Menu allows initial configuration of the Service Password, Password
Settings (on/off), MMSI/IMO Numbers and the option of resetting the NAUTICAST to Factory
Settings.
The Service Password is required in order to enter the Service Configuration Menu. This is a higher
security level than can be reached with the User Password and therefore ensures that the Service
Configuration is protected, and limited to authorized service personnel.
NOTE: The default password from the factory is mentioned on your AIS display at the
protection foil. (see Appendix 0 for password information).
Dynamic Keys: Service Configuration
[M5]
[Select]
Confirm Submenu
Selection
[Enter]
Confirm Submenu
Selection
[M8]
[Back]
Return to Main
Menu
After entering the Default Service Password in the password query, the Service Configuration Menu
may be accessed. In this menu it is possible to configure both the Service Password and the User
Password Settings, as well as input the MMSI/IMO Numbers and reset them to Factory Settings.
N 1
o
23' E 0
o
17' |1>0.10|2>1.30|3>1.80nm
|----------------------------------
| 6. Service Configuration
-----| |
| +- 1. Change Service Password
View | +- 2. User Password Settings
| +- 3. Change MMSI / IMO
-----| +- 4. Restore Factory Settings
|
Msg. |
|
-----|
|
Displ|
----------------------------------------
NUM| Select->| | |<-Back
N 1
o
24' E 0
o
17' |1>0.10|2>1.30|3>1.80nm
----------------------------------------
++++++++++++++++++++++++++++++++++++++++
Service password protected!
Please enter service password:
++++++++++++++++++++++++++++++++++++++++
----------------------------------------
| Enter | | | Exit