Canon EOS C100 - Manual (Page 109)

109
Clip Operations
Deleting a Selection of Clips/Shots
1 Open the clip selection or shot selection index screen.
[w Other Functions] > [Clips] > [Delete] > [Select]
[w Other Functions] > [Delete Shots] > [Select]
2 Using the joystick, bring the orange selection or shot selection frame to
a clip you wish to delete and then press the joystick.
• A checkmark " will appear next to the clip's thumbnail to indicate it
was selected. Press the joystick again to remove the checkmark.
• Repeat this step to select all the clips you wish to delete. The total
number of selected clips will appear at the bottom of the screen, next
to the
" icon.
3 After selecting all the desired clips, press the MENU button.
4 Select [OK] and then press the joystick.
• Select [Cancel] instead to return to the clip selection screen.
• While the clips are being deleted, you can press the joystick to
cancel.
5 When the confirmation message appears, press the joystick.
Deleting All Clips/Shots
1 Open the [Clips Delete All] or [Delete Shots All] screen.
[w Other Functions] > [Clips] > [Delete] > [All]
[w Other Functions] > [Delete Shots] > [All]
2 Select [OK] and then press the joystick.
• All of the clips on the selected SD card will be deleted.
• Select [Cancel] instead to cancel the operation.
• While the clips are being deleted, you can press the joystick to
cancel.
3 When the confirmation message appears, press the joystick.
Converting Clips to Standard Definition
You can convert original AVCHD clips to standard definition (MPEG-2) movies. The down-conversion to standard
definition requires two SD cards: one (source) that contains the source clips to be converted and the other one
(destination) that will store the converted files (SD movies).
Converting a Single Clip to Standard Definition
1 Select the desired clip from the index screen of the source card and then press the joystick to open the clip
menu.
2 Select [Convert HD`SD] and then press the joystick.
• The estimated size of the converted SD movie and the available space on the destination card will be
displayed on the screen.
3 Select [OK] and then press the joystick.
• Select [Cancel] instead to cancel the operation.
[w Other Functions]
[Clips]
[Delete]
[Select]
[w Other Functions]
[Delete Shots]
[Select]
[w Other Functions]
[Clips]
[Delete]
[All]
[w Other Functions]
[Delete Shots]
[All]
COP
Y