Canon EOS C100 - Manual (Page 48)

Recording Video
48
Onscreen Displays
Refer to this section for an explanation of the various screen displays that appear in mode. You can use
the custom display function ( A 99) to turn off individual onscreen displays if they are not required.
When displaying the date and time ( A 26):
* The displayed value is an estimate.
**Only displayed when [w Other Functions] > [Bit Rate] is set to [24 Mbps LPCM].
NOTES
• You can press the DISP. button to switch the onscreen displays in the following sequence.
Show all onscreen displays
→ show only onscreen markers* → hide all onscreen displays.
* Only when [£ LCD/VF Setup] > [Markers] > [Enable] is set to [On].
1213 14 15
18
17
22
24
23
25
26
19
20
21
1
2
27 29 28 35 30 33 34 31 32
16
8
3
4
7
9
10
11
5
6
36
1 Remaining battery time (A 49)
2 SD card status/available recording time (A 49)
3 Remaining recording time for double slot
recording (A 41)/CONT: Total shot recording
time during continuous recording (A 85)
4 Current focal length of an attached EF lens*
5 High temperature warning and cooling fan
operation (A 37)
6 Light metering (A 62)
7 Focus mode (A 65)
8 ND filter (A 59)
9 Custom picture (A 90)
10 Key lock (A 47)
11 White balance (A 63)
12 View assistance (A 50)
13 Magnification (A 67)
14 Recording operation (A 49)
15 One-shot AF's autofocus frame (A 65)
16 Onscreen displays superimposed on video output
(A 116)
17 Time code (A 70)
18 Onscreen displays recorded with the clip (A 99)
19 Photo recording - available number of photos
(A 121)
20 Bit rate (A 51)
21 LPCM audio recording** (A 74)
22 Frame rate (A 51)
23 HDMI recording command (A 136)
24 User bit (A 73)
25 Audio output channel (A 117)
26 Audio level meter (A 75, 78)
27 Aperture value (A 60)
28 AE shift (A 61)
29 ISO speed/Gain (A 57)
30 Exposure bar (A 61)
31 Shutter speed (A 54)
32 Peaking (A 67)
33 Sensor area correction for EF-S lenses (A 31)
34 Lens error warning (A 147)
35 Audio peak limiter (A 75, 78)
COP
Y