Canon EOS C100 - Manual (Page 22)

Preparing the Power Supply
22
• Charged battery packs continue to discharge naturally. Therefore, charge them on the day of use, or the day
before, to ensure a full charge.
• We recommend that you prepare battery packs to last 2 to 3 times longer than you think you might need.
• To charge the battery pack, disconnect the DC cable from the compact power adapter.
Attaching the Battery Pack
1 Set the Q switch to OFF.
2 Insert the battery pack all the way into the compartment as shown
in the illustration and press it gently toward the left until it clicks.
Removing the Battery Pack
1 Set the Q switch to OFF.
2 Push the BATTERY RELEASE latch in the direction of the arrow.
While holding it down, slide the battery pack toward the right and
then pull it out.
COP
Y