Canon EOS C100 - Manual (Page 33)

33
Preparing the Camcorder
Using the Viewfinder
Dioptric Adjustment
Turn on the camcorder and adjust the dioptric adjustment
lever.
Using the LCD Panel
1 Pull the LCD panel 90° up.
2 Rotate the LCD panel 180° left.
3 Push down the LCD panel to adjust it to the desired angle of view.
NOTES
• You can set the LCD screen to black & white (A 34).
• When you use a commercially available lens adapter and the image on
the screen is inverted, you can use the [w Other Functions] > [Custom
Function] > [Scan Reverse Rec] setting to return the image to the
correct orientation.
• If you are not interested in using the viewfinder along with the LCD
screen, you can set [£ LCD/VF Setup] > [LCD/VF Simul.] to [Off] to
conserve the camcorder’s power. Even when [LCD/VF Simul.] is set to
[Off], closing the LCD panel will automatically activate the viewfinder.
Adjusting the Viewfinder/LCD Screen
You can adjust the brightness, contrast, color, sharpness, and backlight
of the viewfinder and LCD screen independently of each other. These
adjustments will not affect your recordings.
1 Open the setup menu for the viewfinder or LCD screen.
[£ LCD/VF Setup] > [LCD Setup] or [VF Setup]
2 Select [Brightness], [Contrast], [Color], [Sharpness] or [Backlight]
and then press the joystick.
3 Adjust the setting and then press the joystick.
• Repeat steps 2 and 3 to adjust other settings as necessary.
NOTES
• If you set an assignable button to [LCD Setup] or [VF Setup] (A 87), you can press the button to open the
respective submenu.
Operating modes:
Dioptric
adjustment
lever
[£ LCD/VF Setup]
[LCD Setup]
[VF Setup]
[Brightness: ±0]
[Contrast: ±0]
[Color: ±0]
[Sharpness: 2]
[Backlight: Normal]
COP
Y