Canon Wireless File Transmitter WFT-E7A - Manual (Page 13)

13
When the AC Adapter Kit ACK-E6 (sold separately) is used, a household power outlet can be
used to power the transmitter without worrying about the battery level.
1 Connect the DC coupler plug.
Connect the DC coupler plug to the socket of the
AC adapter.
2 Connect the power cord.
Connect the power cord as shown.
Insert the plug into the outlet.
After usage, unplug from the outlet.
3 Insert the DC coupler.
Open the cover, and insert the DC coupler firmly
until the lock position.
4 Close the cover.
Pass the cord through the groove while opening
the cap of the DC coupler cord notch, and then
close the cover.
Using a Household Power Outlet
Do not connect or disconnect the power cord while the transmitter’s power switch is set to <ON>.
Do not connect and use AC Adapter Kits ACK-E6 with both the camera and transmitter WFT-E7
simultaneously. It may cause malfunction to the nearby electronic devices. For more information,
contact a Canon Service Center.
COP
Y