Quick reference guide – Canon REALIS WUX10 MARK II D User Manual
Page 5
5
Quick Reference Guide
This Quick Reference Guide will help you find functions that make full use of the projector,
are useful in producing an attractive presentation, and so on.
Connecting to the Computer (
Connecting to AV Equipment (
Starting Projection (
Selecting an Input Signal (
Adjusting the Image Size and Focus (
Adjusting Keystone Distortion (
)
Adjusting Aspect Ratio (
)
Eliminating Flickers from Computer Screen or
Adjusting Positional Shift (
)
Projecting an Image on a Greenboard (
Selecting an Image Mode Suitable for the
Projecting Image (
)
Making Fine Color Adjustments (
Removing Noise (
Blackened Out an Image Temporarily (
)
Freezing the Picture (
)
Adjusting the Volume (
)
Muting the Sound (
Zooming an Image (
)
Showing the Elapsed Time (
Resetting Password (
)
Initializing a Network Setting (
Resetting to the Default Setting (
Reducing the Lamp Brightness (
Using the Power Saving Mode (
)
Turning on the Projector by Connecting the
Power Cord (
Disabling the Beep During the Operation (
)
Disabling Buttons (
)
Hiding Guide Messages (
)
Turning Off the Projector LED Lamps (
)
Setting a Password (
Connecting the Projector
Projecting an Image
Adjusting Image
Adjusting Colors and Image Quality
Producing a Presentation
Ceiling Mounted Projection or Projecting
from behind Screen (
Changing Remote Control Channel
Resetting Projector Setting
Miscellaneous Functions