On-screen messages – Canon PowerShot A2600 User Manual

Page 107

Advertising
background image

107

1
2
3
4
5
6
7

8

Cover
Preliminary Notes

and Legal Information
Contents: Basic

Operations

Advanced Guide

Camera Basics
Smart Auto

Mode
Other Shooting

Modes

Playback Mode

Setting Menu

Accessories

Appendix

Index

Basic Guide

P Mode

On-Screen Messages

If an error message is displayed, respond as follows.
No memory card

The memory card may be inserted facing the wrong way. Reinsert the memory card

facing the correct way (

=

15

).

Memory card locked

The write-protect tab of the memory card is set to the locked position. Switch the

write-protect tab to the unlocked position (

=

15

).

Cannot record!

Shooting was attempted without a memory card in the camera. To shoot, insert a

memory card facing the correct way (

=

15

).

Memory card error (

=

83

)

If the same error message is displayed even after you have formatted a supported

memory card (

=

2

) and have inserted it facing the correct way, contact a Canon

Customer Support Help Desk (

=

15

).

Insufficient space on card

There is not enough free space on the memory card to shoot (

=

33

,

45

,

53

)

or edit images (

=

77

79

). Either erase unneeded images (

=

74

) or insert a

memory card with enough free space (

=

15

).

Charge the battery (

=

12

)

No Image.

The memory card does not contain any images that can be displayed.

Protected! (

=

72

)

Unidentified Image/Incompatible JPEG/Image too large./Cannot play

back MOV/Cannot play back MP4/RAW

Unsupported or corrupt images cannot be displayed.

It may not be possible to display images that were edited or renamed on a computer,

or images shot with another camera.

Cannot magnify!/Cannot rotate/Cannot modify image/Cannot modify/

Cannot assign to category/Unselectable image.

The following functions may be unavailable for images that were renamed or already

edited on a computer, or images shot with another camera. Note that starred (*)

functions are not available for movies.

Magnify* (

=

71

), Rotate (

=

75

), Edit* (

=

77

79

), Print List* (

=

97

),

and Photobook Set-up* (

=

99

).

Exceeded selection limit

Print List (

=

97

) or Photobook Set-up (

=

99

) settings could not be saved

correctly. Reduce the number of selected images and try again.

Communication error

An excessive amount of images (approx. 1,000) on the memory card prevented

printing or image transfer to a computer. To transfer the images, use a commercially

available USB card reader. To print, insert the memory card directly into the printer

card slot.

Naming error!

The folder could not be created or images could not be recorded, because the highest

supported folder number (999) for storing images on the card has been reached and

the highest supported image number (9999) for images in folders has been reached.

In the [

3] menu, change [File Numbering] to [Auto Reset] (

=

83

), or format the

memory card (

=

82

).

Lens Error

This error may occur if the lens is held while it is moving, or when the camera is used

in dusty or sandy locations.

Frequent display of this error message may indicate camera damage. In this case,

contact a Canon Customer Support Help Desk.

A camera error was detected (error number)

If this error message is displayed immediately after a shot, the image may not have

been saved. Switch to Playback mode to check for the image.

Frequent display of this error message may indicate camera damage. In this case,

write down the error number (Exx) and contact a Canon Customer Support Help

Desk.

Advertising
This manual is related to the following products: