Canon PowerShot A2600 - Manual (Page 73)

73
1
2
3
4
5
6
7
8
Cover
Preliminary Notes
and Legal Information
Contents: Basic
Operations
Advanced Guide
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
Playback Mode
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
• Protected images on a memory card will be erased if you format the
card ( = 82 , 83 ).
• Protected images cannot be erased using the camera’s erasure function. To
erase them this way, first cancel protection.
Choosing Images Individually
1 Choose [Select].
z z Following step 2 in “Using the Menu”
( = 72 ), choose [Select] and press the
< m> button.
2 Choose an image.
z z Press the < q><r> buttons to choose an
image, and then press the < m> button.
[ ] is displayed.
z z To cancel selection, press the < m>
button again. [ ] is no longer displayed.
z z Repeat this process to specify other
images.
3 Protect the image.
z z Press the < n> button. A
confirmation message is displayed.
z z Press the < q><r> buttons to choose
[OK], and then press the < m> button.
• Images will not be protected if you switch to Shooting mode or turn
the camera off before finishing the setup process in step 3.
Specifying All Images at Once
1 Choose [Select All Images].
z z Following step 2 in “Using the Menu”
( = 72 ), choose [Select All Images] and
press the < m> button.
2 Protect the images.
z z Press the < o><p> buttons to choose
[Protect], and then press the < m>
button.
• To cancel protection for groups of images, choose [Unlock] in step 2.