Canon PowerShot A2600 User Manual
Page 92
92
1
2
3
4
5
6
7
8
Cover
Preliminary Notes
and Legal Information
Contents: Basic
Operations
Advanced Guide
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
Playback Mode
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
Still Images
Movies
Powering the Camera with Household Power
Powering the camera with AC Adapter Kit ACK800 and DC Coupler
DR-DC10 (both sold separately) eliminates the need to monitor the
remaining battery level.
1
Make sure the camera is off.
2
Open the cover.
z
z
Follow step 1 in “Inserting the Batteries”
(
) to open the memory card/
battery cover, and then open the coupler
cable port cover as shown.
3
Insert the coupler.
z
z
Insert the coupler as shown.
z
z
Make sure the coupler cable passes
through the port.
A1400
Coupler Cable Port
4
Close the cover.
z
z
Lower the cover ( ) and hold it down as
you slide it, until it clicks into the closed
position ( ).
5
Connect the power cord.
z
z
Insert the adapter plug into the end of the
coupler cable.
z
z
Insert one end of the power cord into the
compact power adapter, and then plug
the other end into a power outlet.
z
z
Turn the camera on and use it as desired.
z
z
When finished, turn the camera off and
unplug the power cord from the outlet.
•
Do not disconnect the adapter or unplug the power cord while
the camera is still on. This may erase your shots or damage the
camera.
•
Do not attach the adapter or adapter cord to other objects. Doing so
could result in malfunction or damage to the product.