Canon PowerShot A2600 - Manual (Page 29)

29
1
2
3
4
5
6
7
8
Cover
Preliminary Notes
and Legal Information
Contents: Basic
Operations
Advanced Guide
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
Playback Mode
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
Shutter Button
To ensure your shots are in focus, always begin by holding the shutter
button halfway down, and once the subject is in focus, press the button all
the way down to shoot.
In this manual, shutter button operations are described as pressing the
button halfway or all the way down.
1 Press halfway. (Press lightly to
focus.)
z z Press the shutter button halfway. The
camera beeps twice, and AF frames are
displayed around image areas in focus.
2
Press all the way down. (From
the halfway position, press fully
to shoot.)
X X The camera shoots, as a shutter sound
is played.
z z Keep the camera still until the shutter
sound ends.
• Images may be out of focus if you shoot without initially pressing the
shutter button halfway.
• Length of shutter sound playback varies depending on the time
required for the shot. It may take longer in some shooting scenes,
and images will be blurry if you move the camera (or the subject
moves) before the shutter sound ends.
A1400
Optical Viewfinder
To conserve battery power when shooting, you can use the optical
viewfinder instead of the screen. Shoot the same way as when using the
screen.
Deactivate the screen.
z z Press the < p> button to turn the screen
off ( = 30 ).
• The area visible in the optical viewfinder may differ slightly from the
image area in your shots.
• The lens may be partially visible through the optical viewfinder at some zoom
positions.
• Although the camera automatically focuses on subjects, face detection and
focusing is not possible.