Canon imagePROGRAF iPF6400 - Manual (Page 128)

Roll paper is not securely in contact with roll holder. Roll paper is not securely in contact with roll holder.
Cause Corrective Action
Skew Check Lv. on the Control Panel menu is set to something oth-
er than Off and the roll paper is not placed securely in the Roll Hold-
er during loading. Follow these steps to reload the roll.
1. Press the OK button and remove the roll holder from the printer.
2.
Insert the roll firmly on the Roll Holder until it touches the flange.
(See "Loading Rolls on the Roll Holder.")
→P.9
3. Load the Roll Holder in the printer.
Roll paper is not securely in contact with roll holder. iPF6400
Basic Guide
Error Message
Messages regarding paper
128