Canon imagePROGRAF iPF6400 - Manual (Page 131)

Messages regarding printing or adjustment Messages regarding printing or adjustment
Cannot execute this command. Use other paper. .......................................................................................... 131
Cannot print as specified. ......................................................................................................................................... 131
Cannot adjust printhead. ........................................................................................................................................... 134
Cannot calibrate. ........................................................................................................................................................... 131
Excessive temperature or humidity. ..................................................................................................................... 132
Please execute common calibration. .................................................................................................................... 132
Please commn calibrt using above paper. ......................................................................................................... 132
Please calibrate using above paper. ..................................................................................................................... 132
Before borderless printing, move the blue platen switch. .......................................................................... 132
Borderless printng not possible. ............................................................................................................................ 127
Blue platen switch is dirty. ........................................................................................................................................ 133
Move the blue platen switch No.xx to the right. (xx represents a number) ........................................ 133
Cannot adjust paper feed. ........................................................................................................................................ 133
Check printed document. .......................................................................................................................................... 133
Cannot execute this command. Use other paper. Cannot execute this command. Use other paper.
Cause Corrective Action
Paper compatible with
color calibration is not
loaded. 1.
Press the OK button to clear the error.
2.
Load paper that is compatible with color calibration.
See the Paper Reference Guide.
(See Paper Reference Guide .)
Always make sure the loaded paper matches the type of paper in the printer paper settings. Adjustment cannot
be completed correctly unless the loaded paper matches the settings.
Cannot print as specified. Cannot print as specified.
Cause Corrective Action
The loaded paper is too small.
(When you have attempted to print a test print
sheet or other printer status information.) Replace the paper with paper of A4/Letter (vertical) size or larger as follows.
1.
Press ▲ or ▼ to select Change Paper, press the OK button, and remove the paper.
(See "Removing Sheets.")
→P.23
2.
Switch to paper A4/Letter (vertical) or larger.
(See "Loading and Printing on Sheets.")
→User's Guide
The printer will resume printing.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
Cannot calibrate. Cannot calibrate.
Cause Corrective Action
The paper for printing a test pattern is soiled. Other-
wise, you have loaded colored paper. Press the OK button to clear the error.
Load unused paper compatible with color calibration.
(See Paper Reference Guide .)
The test pattern was printed too faintly. Press the OK button to clear the error.
Take steps to remedy faint printing.
(See "Printing is faint.")
→P.101
Direct sunlight or strong lighting may be shining on the
printer and causing the sensor to malfunction. Press the OK button to clear the error.
Take steps to ensure the printer is not used when exposed to direct sunlight or
strong lighting.
iPF6400 Cannot execute this command. Use other paper.
Basic Guide
Error Message
Messages regarding printing or adjustment
131