Canon imagePROGRAF iPF6400 - Manual (Page 132)

Excessive temperature or humidity. Excessive temperature or humidity.
Cause Corrective Action
The temperature or humidity where the
printer is installed is out of the acceptable
range for operation. Press ▲ or ▼ to select Stop, and then press the OK button to stop printing.
Use the printer under suitable environmental conditions. Also note that various environmental
conditions are recommended for various types of paper. For details on the recommended en-
vironmental conditions, see the Paper Reference Guide.
(See Paper Reference Guide .)
Press ▲ or ▼ to select Continue, and then press the OK button to continue with color cali-
bration. However, note that correct adjustment may not be possible.
Please execute common calibration. Please execute common calibration.
Cause Corrective Action
There is not even one Common calibration execution result.
Note that this is displayed when all of the following are satisfied.
•
If Set Exec. Guide is On in the Control Panel menu.
• If the printer is loaded with a type of paper on which color calibration cannot be executed.
Execute Common calibration.
(See "Color Calibration Using the Printer
Sensor.")
→User's Guide
Set Set Exec. Guide to Off on the Control
Panel menu.
(See "Menu Structure.")
→P.55
Please commn calibrt using above paper. Please commn calibrt using above paper.
Cause Corrective Action
It is now recommended that you execute Common calibration.
Note that this is displayed when Set Exec. Guide in the Control Panel menu is set to On and any of the
following is true.
• If the printer is loaded with a type of paper on which color calibration cannot be executed and the pre-
defined conditions since executing the Common calibration the last time have been reached.
• Although a media type that color calibration can be executed on is loaded in the printer, there is no
record or performing color calibration on that media, and the designated criteria from executing Com-
mon calibration the last time have been reached.
Execute Common calibration.
(See "Color Calibration Using
the Printer Sensor.")
→User's Guide
Set Set Exec. Guide to Off
on the Control Panel menu.
(See "Menu Structure.")
→P.55
Please calibrate using above paper. Please calibrate using above paper.
Cause Corrective Action
It is now recommended that you execute Unique calibration.
Note that this is displayed when Set Exec. Guide in the Control Panel menu is set to On and any of the
following is true.
•
If the printer is loaded with a type of paper on which color calibration can be executed, but there is no
record of having executed color calibration on that paper or a record of having executed Common cali-
bration other any other type of paper.
• If the printer is loaded with a type of paper on which color calibration can be executed, there is a record
of having executed color calibration on that paper, and the predefined conditions since executing the
color calibration the last time have been reached.
Execute Unique calibration.
(See "Color Calibration Us-
ing the Printer Sensor.")
→User's Guide
Set Set Exec. Guide to Off
on the Control Panel menu.
(See "Menu Structure.")
→P.55
Before borderless printing, move the blue platen switch. Before borderless printing, move the blue platen switch.
Cause Corrective Action
The blue Switch on the platen was set to the side opposite ●
when a borderless print job was received. Before borderless printing, set the blue Switch on the platen to the ● side.
(See "Setting the Blue Switch on the Platen.")
→P.106
Excessive temperature or humidity. iPF6400
Basic Guide
Error Message
Messages regarding printing or adjustment
132