Canon PIXMA iP100 - Manual (Page 12)

8 Before Using the Printer
Turning the Printer On and Off
Turn on the printer before printing.
„ Turning on the Printer
1
Open the Rear Tray Cover.
The Paper Output Slot Cover will open automatically.
2
Press the Power button.
The Power lamp flashes green, and changes to
steady, non-flashing light.
3
Turn on your computer.
Note
If preparatory operations below are not complete, follow your setup sheet to complete them.
z
The Print Head and ink tanks are set into place.
z The printer is connected to your computer (or a compatible device).
z The printer driver is installed.
Important
z If you use the battery, make sure that it is charged.
For details, refer to the battery’s instruction
manual.
z If the Alarm lamp begins to flash orange, see
“Alarm Lamp Flashes Orange” on page 67.