Canon PIXMA iP100 - Manual (Page 13)

9 Before Using the Printer
„ Turning off the Printer
1
To turn off the printer, press the Power
button.
When the Power lamp stops flashing, the printer is
turned off.
This takes a few seconds or as long as around 30
seconds.
Note
Auto Power Off Feature
You can set the printer to turn off automatically.
Set this setting in the Maintenance sheet of the printer
driver in Windows
®
, and in the Canon IJ Printer
Utility on a Macintosh
®
. For setting details, refer to the
PC Printing Guide on-screen manual.
Important
When turning off the printer
Follow the procedure below to turn off the printer.
1. Confirm that the Power lamp on the printer
has gone out.
2. Unplug the power plug from the wall outlet.
When you press the Power button to turn off the
printer, the printer automatically puts a protective cap
on the Print Head to prevent the ink from drying. If you
remove the power plug before the Power lamp goes
out, this capping will not be done properly, causing the
Print Head to dry and clog.
If you stand the printer up or carry the printer
before the Power lamp goes out, this may cause
the ink to leak or the printer to break.