ADIC Server - Manual (Page 206)

A-6 Application Notes
601626-B
22 ERERTRYL The maximum number of automatic retries for
recovering has been exceeded.
There is a problem in the AMS.
Check the AMU-Log for more information:
• <0420> Cartridge not ejected.
• The dismount manager is not configured
correctly (Refer to the AMU Reference Guide).
• The drive has not received the unload
command (send unload via data path to the
drive or to DAS aci_unload.
• The drive has a physical problem (call
Service).
• <1191> Tower not available. The tower can be
set back to the ready status with the status
command, if the tower does not have a physical
problem (call Service).
• <1123> Too many commands; possible AMS
overload.
• Restart the AMU. Do not send so many
commands at one time, or request AMU
hardware with more performance.
• <1290> Command Canceled from AMS.
Internal problem in the AMS software, try a
restart of the AMU.
23 ENOTMOUNTED AMS returned the error code 1162, the volser
named is not in the AMU database.
• Check the Volser in the command.
• If there is a cartridge in the drive (previous
error with database mismatch or manual
intervention), the AMU database must be
updated.
24 EINUSE The requested volser is already in use. Wait until
the usage of the cartridge is completed or send a
unload and a dismount of the drive, that is using
the requested volser.
25 ENOSPACE Problem with the aci_register, aci_clientaccess
and aci_foreign commands. The limits for
configured ranges have been exceeded. Remove
old ranges, before registering something new.
Table A-1 Error Code Reactions
Number d_error Name Recommended Reactions to the Error Code