Alpine DVA-9861 - Manual (Page 26)

24
-EN
Displaying Time
Press TITLE repeatedly until the time is displayed.
Each press changes the display.
For details, see “Displaying the Text” (page 23).
• Selecting any tuner or CD function while in the clock priority mode
will interrupt the time display momentarily. The function selected
will be displayed for about 5 seconds before the time returns to the
display.
• When the power is off but the ignition key is on, press TITLE to
display the time.
Blackout Mode On and Off
When Blackout mode is turned on, the display and button illumination
will turn off to reduce power consumption. This additional power
enhances the sound quality.
Press and hold FUNC. for at least 2 seconds to activate
the blackout mode.
The display and button illumination will turn off.
• If any button on the unit is pressed during the blackout mode, the
function will be displayed for 5 seconds to show the operation before
returning to Blackout mode.
To cancel Blackout mode, press and hold FUNC. for at least 2
seconds
Setting the Wallpaper
A data file downloaded from the ALPINE Owner’s website is written to
a CD-R/CD-RW disc, and automatically uploaded when the disc is
inserted into the DVA-9861.
The wallpaper file can be saved and displayed as long as a disc is not
inserted, or while playing a CD/MP3/WMA audio, or if a DVD disc is
stopped.
• If several files are stored in a disc, only the first file will be stored on
the unit.
Insert a CD-R/CD-RW disc containing data.
After sensing the disc, the data file is updated.
• Up to 2 files can be stored on this unit. If a third file is downloaded,
the first file is overwritten and new one memorized.
• To change the wallpaper, press and hold ENT. on the remote control
unit for at least 2 seconds while disc is not inserted, or while PRE-
STOP or STOP is set in disc mode.
• Even if the battery power cable is removed, the downloaded data is
not cleared.
You can flexibly customize the unit to suit your own preferences and
usage. Choose the SETUP menu from Sound Customizing, Visual
Customizing, etc., to select your desired setting.
1
Press MENU to select the SETUP mode, then press
MODE.
BBE BASS ENGINE SETUP RETURN (OFF) BBE
SETUP mode is activated.
2
Press or to select the desired SETUP
menu, then press MODE.
(e.g. Select SUBWOOFER)
DIMMER SUBWOOFER (SUBW SYSTEM)* 1
PLAY MODE SCROLL TYPE TEXT SCROLL
INT MUTE AUX IN (AUXNAME)* 2 POWER IC
(CH SELECT)* 3 (XM ADF)* 3
OPT OUTPUT STATION DEMO DIMMER
* 1 Displayed only when SUBW is ON.
*
2
Displayed only when AUX is ON.
*
3
When SAT is connected.
For the SAT Radio Setting, refer to “SAT Radio Receiver (Optional)”
(page 32).
3
Turn the Rotary encoder to change the setting.
(e.g. Select SUBW ON or SUBW OFF.)
4
Press MENU to select RETURN.
After 2 seconds, the unit returns to normal mode.
Pressing and holding MENU for at least 2 seconds will
return to normal mode.
Subwoofer On and Off
When the subwoofer is on, perform the steps below to adjust the
subwoofer output level.
1 In the normal mode, press MODE repeatedly to select the
SUBW mode.
2 Adjust the level by turning the Rotary encoder.
SETUP
A typical SETUP procedure is shown in steps 1 to 4 as
follows. See below for further information about each
SETUP menu.
Sound Customizing
SUBW ON (Initial setting) / SUBW OFF
BASS TREBLE SUBW BALANCE FADER
DEFEAT VOLUME BASS
Rotary
encoder
MODE
SOURCE/
POWER
MENU BAND