Alpine DVA-9861 - Manual (Page 69)

67
-EN
System Example
Connect the Ai-NET compatible digital audio processor (Fiber optic compatible) and touch panel-compatible monitor/changer.
Video output Lead
(Yellow)
Video input terminal
RCA Extension cable (Video)
(Included)
Touch panel-
compatible
monitor box
(sold separately)
Touch panel-
compatible monitor
(sold separately)
Remote control input Lead
(White/Brown)
Remote control output lead
(White/Brown)
Monitor control Lead
(White/Pink)
Monitor control Lead
(White/Pink)
To Digital output terminal
Fiber optic Cable
Fiber optic input terminal (for head unit)
Ai-NET Cable
Ai-NET output terminal
Ai-NET compatible digital
audio processor
(sold separately)
(Fiber optic compatible)
Ai-NET Cable
Fiber optic
input terminal
(for changer)
*
Fiber optic
cable
Ai-NET compatible CD
changer (sold separately)
System switch EQ/DIV
Only connect fiber
optic compatible
CD changer
• When the fiber optic compatible product is connected, it is necessary to set
the mode of this unit. Refer to “Setting the Digital Output” (page 26) and set
to ON.
Please observe the following when using Fiber Optic Cable.
• Be careful not to bend the Fiber Optic Cable at a sharp angle.
• Do not coil the Fiber Optic Cable smaller than a 30 mm radius.
• Do not place anything on top of the Fiber Optic Cable.
*