Apple iPod nano - Manual (Page 18)

18 Chapter 1 iPod nano Basics
Important: If a “Charging, Please Wait” or “Connect to Power” message appears on the
iPod nano screen, the battery needs to be charged before iPod nano can communicate
with your computer. See“If iPod nano displays a “Connect to Power” message” on
page 66.
If you want to charge iPod nano when you’re away from your computer, you can
purchase the Apple USB Power Adapter.
To charge the battery using the Apple USB Power Adapter:
1 Connect the AC plug adapter to the power adapter (they might already be connected).
2 Connect the iPod Dock Connector to USB 2.0 cable to the power adapter, and plug the
other end of the cable into iPod nano.
3 Plug the power adapter into a working electrical outlet.
WARNING: Make sure the power adapter is fully assembled before plugging it into an
electrical outlet.
AC plug adapter
(The plug on your Power Adapter may look different.)
USB Power Adapter
iPod Dock Connector to USB 2.0 Cable