Apple iPod nano - Manual (Page 41)

Chapter 3 Listening to Music 41
To require a combination to change the maximum volume:
1 After setting the maximum volume, use the Click Wheel to select Lock and then press
the Center button.
2 In the screen that appears, enter a combination.
To enter a combination:
 Use the Click Wheel to select a number for the first position. Press the Center button
to confirm your choice and move to the next position.
 Use the same method to set the remaining numbers of the combination. You can use
the Next/Fast-forward button to move to the next position and the Previous/Rewind
button to move to the previous position. Press the Center button in the final position
to confirm the entire combination.
The volume of songs and other audio may vary depending on how the audio was
recorded or encoded. See “Setting Songs to Play at the Same Volume Level” on page 42
for information about how to set a relative volume level in iTunes and on iPod nano.
Volume level may also vary if you use different earphones or headphones. With the
exception of the iPod Radio Remote, accessories that connect through the iPod Dock
Connector don’t support volume limits.
If you set a combination, you must enter it before you can change or remove the
maximum volume limit.
To change the maximum volume limit:
1 Choose Settings > Playback > Volume Limit.
2 If you set a combination, enter it by using the Click Wheel to select the numbers and
pressing the Center button to confirm them.
3 Use the Click Wheel to change the maximum volume limit.
4 Press the Play/Pause button to accept the change.
To remove the maximum volume limit:
1 If you’re currently listening to iPod nano, press Pause.
2 Choose Settings > Playback > Volume Limit.
3 If you set a combination, enter it by using the Click Wheel to select the numbers and
pressing the Center button to confirm them.
4 Use the Click Wheel to move the volume limit to the maximum level on the volume bar.
This removes any restriction on volume.
5 Press the Play/Pause button to accept the change.
If you forget the combination, you can restore iPod nano. See “Updating and Restoring
iPod Software” on page 69.