Apple iPod nano - Manual (Page 46)

46 Chapter 4 Watching Videos
To use the Apple Component AV Cable to connect iPod nano to your TV:
1 Plug the red, green, and blue video connectors into the component video input
(Y, Pb, and Pr) ports on your TV.
You can also use the Apple Composite AV cable. If you do, plug in the yellow video
connector into the video input port on your TV. Your TV must have RCA video and
audio ports.
2 Plug the white and red audio connectors into the left and right analog audio input
ports, respectively, on your TV.
3 Plug the iPod Dock Connector into your iPod nano or Universal Dock.
4 Plug the USB connector into your USB Power Adapter or your computer to keep your
iPod nano charged.
5 Turn on iPod nano and your TV or receiver to start playing.
Make sure you set TV Out on iPod nano to On.
Note: The ports on your TV or receiver may differ from the ports in the illustration.
To watch a video on your TV:
1 Connect iPod nano to your TV (see above).
2 Turn on your TV and set it to display from the input ports connected to iPod nano.
See the documentation that came with your TV for more information.
3 On iPod nano, choose Videos and browse for a video.
Captions to display Set Captions to On.
Subtitles to display Set Subtitles to On.
To set Do this
USB Power
Adapter iPod Left audio (white)
Dock Connector
Television
Video in (Y, Pb, Pr)
Right audio (red)
USB
connector