Apple iPod nano - Manual (Page 7)

Chapter 1 iPod nano Basics 7
Using iPod nano Controls
The controls on iPod nano are easy to find and use. Press any button to turn on
iPod nano. The main menu appears.
Use the Click Wheel and Center button to navigate through onscreen menus,
play songs, change settings, and get information. Move your thumb lightly around the
Click Wheel to select a menu item. To choose the item, press the Center button.
To go back to the previous menu, press Menu on the Click Wheel.
Here’s what else you can do with iPod nano controls.
To Do this
Turn on iPod nano Press any button.
Turn off iPod nano Press and hold Play/Pause ( ’ ).
Turn on the backlight Press any button or use the Click Wheel.
Disable the iPod nano controls
(so nothing happens if you press
them accidentally)
Slide the Hold switch to HOLD (an orange bar appears).
Reset iPod nano
(if it isn’t responding)
Slide the Hold switch to HOLD and back again. Press the Menu and
Center buttons at the same time for about 6 seconds, until the
Apple logo appears.
Choose a menu item Scroll to the item and press the Center button.
Go back to the previous menu Press Menu.
Go directly to the main menu Press and hold Menu.
Browse for a song From the main menu, choose Music.
Browse for a video From the main menu, choose Videos.
Play a song or video Select the song or video and press the Center button or Play/Pause
(
’ ). iPod nano must be ejected from your computer to play songs
and videos.
Pause a song or video Press Play/Pause ( ’ ) or unplug your headphones.
Change the volume From the Now Playing screen, use the Click Wheel.