Electrolux EQT4520BOG - Manual (Page 26)

Display Description
+ digit There is a malfunction.
/ / 3 step residual heat indicator: continue cooking / keep
warm / residual heat.
The Lock / The Child Safety Device operates.
The Automatic Switch-Off operates.
3.5 OptiHeat Control (3 step
Residual heat indicator)
WARNING!
/ / Risk of burns from
residual heat!
OptiHeat Control indicates the level of the
residual heat.
4. DAILY USE
4.1 On and Off
Touch for 1 second to start or stop the
appliance.
4.2 Automatic Switch Off
The function deactivates the
appliance automatically if:
• All roasting zones are deactivated .
• You do not set the temperature after
you activate the appliance.
• You spill something or put something
on the control panel for more than 10
seconds, (a pan, a cloth, etc.). The
sound operates some time and the ap-
pliance deactivates. Remove the object
or clean the control panel.
• You do not deactivate a roasting zone
or change the temperature. After 90 mi-
nutes
comes on and the appliance
deactivates. Before next use, set the
roasting zone to
.
4.3 The heat setting
Touch the control bar at the heat setting.
Move your finger along the control bar to
change the setting. Do not release before
you have a correct heat setting. The dis-
play shows the heat setting.
If you set the temperature, the display
flashes until the roasting zone reaches the
temperature. Then a signal sounds and
the display shows the temperature.
4.4 Bridge function
The Bridge function connects two roast-
ing zones to have them operate as one.
First set the heat setting for one of the
roasting zones.
To activate the Bridge function, touch
.
To set or change the heat setting, touch
one of the control sensors.
To deactivate the Bridge function, touch
. The roasting zones operate inde-
pendently.
4.5 The Timer
The Count Down Timer.
Use the Count Down Timer to set how
long the roasting zone operates for only
this one time.
26 www.electrolux.com