Bosch Tassimo Hot Beverage System intenso - Manual (Page 20)

18
Bosch Home Appliances
en
Problem Possible cause Solution
The quality of the foam /
crema has deteriorated.
The drink outlet is
clogged or dirty.
Remove the drink outlet from
the brewing unit and detach
the piercing unit. After cleaning
everything thoroughly, reassemble
the parts and replace them in the
brewing unit.
Clean the brewing unit with the
Service T DISC.
The appliance needs to
be descaled.
Descale the appliance (for details
see “Descaling”).
Brewing unit cannot be
securely closed.
T DISC piercing unit or
T DISC holder is not
properly inserted.
Insert T DISC holder or T DISC
piercing unit properly.
The T DISC is not
inserted properly.
Re-insert the T DISC and make
sure it is properly positioned.
The brewing unit is not
properly closed.
Push the handle down until it
snaps into place with an audible
click.
Clean the brewing unit thoroughly,
especially in the area of the clamp.
The brewing unit cannot
be opened.
The brewing unit lock is
still engaged.
Wait until the Status LED F has
stopped blinking before attempting
to open the brewing unit.
Water dripping from the
brewing unit.
The T DISC is damaged
or leaky.
Stop the brewing process. Wait
until the machine is cooled down
before removing the T DISC and
then clean the brewing unit
The piercing unit is
either not inserted or not
inserted properly.
Check to ensure that the piercing
unit is inserted properly.
Water on the surface
under the cup stand.
Water from
condensation.
Condensation may occur and is
not a fault. Remove it by wiping
with a cloth.
The Service T DISC is
damaged or lost.
The Service T DISC is
required for the cleaning
cycle and the descaling
cycle.
Check the storage compartment
for the Service T DISC at the back
of the water tank.
The Service T DISC can be
purchased from TASSIMO
Customer Service Department at
1-877-TDISCS1 (only in the USA)
or on www.tassimo.com.
TAS47_UC.indb 18 04.05.2012 12:36:20