Bosch Tassimo Hot Beverage System intenso - Manual (Page 9)

7
05/2012
en
Controls and Displays
(please refer to the machine illustration at
the beginning of this instruction manual)
ON / OFF switch (1)
The ON / OFF switch is the main power
switch for the machine. You use it to turn
on your TASSIMO machine or turn it off
completely.
i Note:
Your TASSIMO machine automatically
switches to power-save mode. To save
even more electricity, we recommend
turning your TASSIMO machine off with the
ON / OFF switch after each use.
Start / Stop button (2)
The Start / Stop button is used to start
and interrupt the brewing, cleaning and
descaling processes.
Also you can add more water immediately
after the brewing process by pressing and
holding the Start / Stop button.
Status LED F (3a)
The Status LED indicates four machine
conditions:
– Steady orange:
Machine is ready (for example, if the
barcode was recognized)
– Blinking orange:
Machine is in the process of brewing a
drink / cleaning / descaling
– Steady red:
Error mode (for example, if the barcode
was not recognized)
– Dimmed, orange light:
Power-save mode
¡
CAuTION
Wait until the Status LED F has stopped
blinking before attempting to open the
brewing unit.
Fill water tank T (3b)
This indicator lights up when the removable
water tank needs to be reilled or is not in
place.
Descale required Q (3c)
This indicator lights up or blinks when your
TASSIMO machine needs to be descaled.
i Note:
Always descale your TASSIMO machine in
accordance with the instructions provided
under “Descaling” on page 13.
TAS47_UC.indb 7 04.05.2012 12:36:16