Bosch Tassimo Hot Beverage System intenso - Manual (Page 7)

5
05/2012
en
1. Insert the plug into a wall outlet.
► You can adjust the length of the power
cord by pushing it into or pulling it out of
the cord compartment.
► Remove the water tank (5).
► Remove the cup stand (7) and insert
it in the front of the appliance until you
hear an audible click.
2. Then clean the water tank thoroughly
under running water and i ll it up to the
max mark with cool, fresh water.
! IMPORTANT
– Do not use chemically softened water.
3. Remove the Service T DISC (6a) from
the compartment (6) behind the water
tank.
4. Replace the water tank by tilting it
slightly and returning it to its original
position until it clicks into place.
5. Turn the machine on by pressing the
ON / OFF switch (1).
The display elements (3) will light up
briel y.
6. Select a large cup (minimum capacity
8 oz. / 200 ml) and place it on the cup
stand.
1.
2.
3. 4.
min. 8 oz. /
200 ml
5. 6.
First use of your TASSIMO machine
TAS47_UC.indb 5 04.05.2012 12:36:16