I n s ta l l at i o n – Alto-Shaam CC-48 User Manual

Page 4

Advertising
background image

C C S e r i e s O p e r a t i o n & C a r e M a n u a l • 3

I N S TA L L AT I O N

S I T E I N S TA L L AT I O N

In order to maintain

established National

Sanitation Foundation

standards, all

stationary floor models

must be sealed to the

floor with a R.T.V. or

silastic meeting N.S.F.

requirements or

have 6" (152mm)

unobstructed clearance

beneath the unit.
1. The appliance must

be installed on a

stable and level surface.

2. DO NOT install this appliance in any area where it

may be affected by any adverse conditions such as

steam, grease, dripping water, high temperatures, or

any other severely adverse conditions.

3. DO NOT install a heated display case near a cold air

source such as a freezer, air conditioning vents, or

in any area where outside air fluctuation can

affect performance.

4. This appliance must be kept free and clear of

any obstructions blocking access for maintenance

or service.

5. Care must be taken when moving this unit into

place because of its glass components.

®

A number of adjustments are associated with

initial installation and start-up. It is important

that these adjustments be conducted by a

qualified service technician. Installation and

start-up adjustments are the responsibility of the

dealer or user. These adjustments include but are

not limited to thermostat calibration, door

adjustment, leveling, electrical hook-up and

installation of optional casters or legs.

LEVELING

Level the appliance from side-to-side

and front-to-back with the use of a spirit level.

We recommend checking the level periodically to

make certain the floor has not shifted nor the

appliance moved.

NOTE:

Failure to properly level this appliance

can cause improper function.

C A U T I O N

METAL PARTS OF THIS EQUIPMENT
BECOME EXTREMELY HOT WHEN IN
OPERATION. TO AVOID BURNS,
ALWAYS USE HAND PROTECTION
WHEN OPERATING THIS APPLIANCE.

D A N G E R

IMPROPER INSTALLATION,
ALTERATION, ADJUSTMENT,
SERVICE, OR MAINTENANCE COULD
RESULT IN SEVERE INJURY, DEATH
OR CAUSE PROPERTY DAMAGE.

READ THE INSTALLATION,
OPERATING AND MAINTENANCE
INSTRUCTIONS THOROUGHLY
BEFORE INSTALLING OR SERVICING
THIS EQUIPMENT.

C A U T I O N

TO PREVENT PERSONAL INJURY,

USE CAUTION WHEN MOVING OR

LEVELING THIS APPLIANCE.

Advertising
This manual is related to the following products: