Water Inc HP-Soft-4 User Manual
Page 7
Advertising
8. Connect and route the valve drain hose.
Use the provided drain hose to attach to the valve drain fitting. To keep water pressure from blowing the
hose off, use a hose clamp to secure.
9. Locate the other end of the hose at a suitable drain.
Tie or wire the hose in place at the drain point. Also provide an air gap of at least 1-1/2" between the end of
the hose and the drain point.
Figure 2
A – Adapter overflow elbow
B – Overflow hose
C – Valve drain hose
Advertising
This manual is related to the following products: